PLEASE NOTE THESE CONVERTERS ARE ONLY FOR KINETIC-ONE WHEELS FITTED WITH OUR BITEX HUB VARIANTS .. DO NOT BUY IF YOUR WHEELS ARE NOT K1 WHEELS - they are unlikely to fit!
If you purchased a set of K1 wheels for quick release fitting - and you have Bitex 4-in-1 disc hubs then you can convert to the more modern 12x100mm front and 12x142mm rear thru-axle system by buying this kit.
THE KIT COVERS BOTH FRONT AND REAR WHEELS. Make sure you order the right kit - determined by whether you have Bitex Centerlock hubs or Bitex 6-bolt hubs. Fitting instructions below:
UK SHIPPING 4-5 DAYS
Then take the 12mm axle. Remove the black endcap and slide the 12mm axle in from the drive side - threaded end first. Then tighten the end caps firmly using 2x 17mm spanners.
Shipping Weight (Box plus wheels)