INTENDED USE: With weights as low as 1395 grams - This is the latest version of our Premium “Ultimate” full carbon 50mm deep aero wheelset. Fully updated with the latest carbon FILAMENT WOUND (FW) technology to create a fantastic ride performance, with superb braking, cushioning, cross-wind handling and heat dissipation.
This wheelset is ideal for Road, Sportives, Triathlons, and also spot-on for Time Trials too. They are "2-Way Fit", Meaning they are designed for both clincher tyres and the new generation of tubeless tyres.
The standard and supertough AEROLIGHT build version weighs only 1450 GRAMS grams (see below).
If you want all out aero gains: the AERO build version with full-on 3mm bladed spokes is the model to go for. The bladed spokes add about 70 grams.
For Maximum Aerodynamics and Lightness: go for our SUPERAEROLIGHT build version (with the wonderfully aero psr superlight spokes/Bitex Superlight hubs).... They come in at 1395 Grams a PAIR!!
Or if you want it all - Aerodynamics, Lightness combined with the world's best engineered hubs then go for the Ultimate DT240s/Cxray build version.
Your wheels will be hand built to order here in the UK by Andy Morgan, owner and founder of k1 wheels. Turnaround time is most often 7-11 days. (current build times are shown at checkout).
THIS IS THE HIGHER SPEC PARTNER TO OUR STANDARD 50UC FULL CARBON WHEELS. See Here
Sounds fancy: Filament winding technology is an automated method which has revolutionised rim consistency in the manufacture of full carbon wheels. Made from a single carbon filament - the manufacturing process enables precise control of every step - resulting in the roundest, strongest, lightest wheel combinations.
This level of precision and care extends throughout the entire quality control process - with each and every rim X-Rayed for structural uniformity and compliance.
Not only does this make for stronger, longer lasting wheels - but also the nature of the "winding process" facilitates another new technology that massively increases braking capability - especially at high temperatures.
The filament winding process enables the injection of a patented ultra heat resistant resin - directly into the carbon filaments - whilst the rim is built. This means the rim's braking surface is fully impregnated with resin during manufacture - rather than a braking surface being added to the surface of the rim post-production.
This makes for better braking - especially on long hot descents. These rims have their braking performance tested up to 230 degrees celcius. This is 20 degrees higher than our previous rims - and as high as any top-end rims on the market.
NOTE: Whilst rim tech has leapt forward in recent years - there are still some major things users of carbon wheels need to know! Please do read our page on safe braking and care for your carbon wheels HERE
Your wheels will be Handbuilt in the K1 workshop in Gloucestershire. We combine traditional wheel-building techniques with cutting edge technology. And the world of carbon wheel-tech moves endlessly forward! Exciting times!
YOU CAN RUN THESE WHEELS WITH CLINCHERS OR WITH TUBELESS TYRES: IF YOU WANT US TO SUPPLY AND FIT NEW GENERATION TUBELESS TYRES WE CAN DO THIS FOR £133 (Includes tyres/tapes/sealant/valves and extenders - so that you're ready to ride them straight out of the box. CLICK HERE if you'd like to purchase this option!
Ideal for tyres from 25c right up to 30c and beyond. Perfect for running tyres at lower pressure and arguably more aerodynamic and faster rolling than traditional hoops.
The rim width debate will continue to rage and rage. What with rims now available from 19 mm right through to 28mm wide. We've decided to go straight down the middle and our rims are Significantly wider than old-school rims but not crazy wide. We think that's the best place to be!
Offered With Full 2 Year Warranty Plus A 14 Day "No Quibble Returns Policy" - If You're Not In Love With These Wheels The Moment You Get Them Just Send Them Back For A Refund Any Time Within 14 Days Of Receipt.
Full Carbon Clincher 700 C - Filament wound with patented Ultra-High Temp Resin impregnated braking surface.
50mm vertical depth (55mm deep measured circumferentially) U-shaped, 25.5mm wide, Full carbon Clincher rim - TUBELESS COMPATIBLE. UD MATTE CARBON
|FREEHUB FITTING||SHIM/SRAM 7/8/9/10/11 or CAMPAG 9/10/11|
|HUB||Ambrosio Italian sealed hubs as standard or upgrade to Bitex 6-Drive hubs.|
|BEARINGS||Sealed Cartridge throughout – All hub types|
|SPOKE OPTIONS||K1 Bladed Black, OR PSR aero, or Sapim CXRay|
|NIPPLES||Alpina Blu power Nyloc Self-locking (the best!)|
|Carbon specific brake pads||Included|
|WEIGHT||1455 GRAMS PER PAIR Aerolight Version.
1395 GRAMS PER PAIR SUPERAEROLIGHT version
1520 GRAMS PER PAIR. AERO Version
(weights campag - add 27 grams shimano)
|SUGGESTED MAX RIDER||120kg|
Once again they flatter my ability.
First real test on the wheels, I set an all time pb over 10 miles. Once again they flatter my ability. 7th overall and age category win!
Great set of strong, lightweight wheels. Superb customer service, satisfaction guaranteed, beyond any imagination. Totally satisfied.
Just wanted to say thanks for the wheels. They're great. Lightweight, strong and true. Took them on the club chaingang and had lots of people asking where they're from so hopefully put a few more customers your way. Attached a photo of them on my old btwin Mach 740. Forgot to mention, superb value for money (see gallery)
Great wheels, they look and feel great to ride. A great improvement on the standard wheels that came with the bike. Excellent communication and delivery information.
I do love these wheels. It did take some serious soul-searching before i finally hit the button and went for wider rims. (I used to race on 16mm rims back in olden-times!) I did have a few problems with setup as My Tektro brake calipers could not really handle the width of the rim. As soon as I put some Shimano brakes on all fine and I have not looked back - 28c tyres are so comfortable too. Brave new world!
I carried out a lot of research before deciding to purchase the K155 carbon wheels with 28mm wide tyres. I decided to go for lighter Sapim CRray on Bitex hubs, so they would be lighter than my existing wheel set. I have found a marked increase in speed on the flat using the same effort / power & down hill speed has increased also. Really like how they look. So all in all I'm very happy with my purchase at a very competitive price & would highly recommend these wheels to others.
I bought these on recommendation from a friend. I've nothing to compare them with as they are my first and only (ever i suspect) pair of carbon wheels. I do know they make me go faster and make my bike look very nice. Being able to choose the finish colour is a very nice touch. Thank you.